HighGear AXIO Series - Button Functions

ENGLISH
10
Button Functions
1. ADJUST Button
 • Pressandholdfor3secondstoentermodesettings(exceptinCHRONandDATAmodes).
 • Exitsettingsatanytime.
 • ResetChronographwithoutsaving.
 • Pressandholdfor3secondstoclearlastrunfromDATAmode.
 • Pressandholdfor6secondstoclearALLrunsfromDATAmode.
2. MODE Button
 • Pressoncetotogglethroughmodeselections.
 • Movetonextsettingduringadjustmentinanymode.
3. START / + Button ( RECALL / + )
NOTE: START / + is labeled as RECALL / + on AXIO max.
 • PresstoviewalternatetimezoneinTIMEmode.
 • Pressandholdfor3secondstoswitchtoalternatetimezone.
 • PresstoviewalternateunitinALTI-BAROmode.
 • Pressandholdfor3secondstoswitchunitsinALTI-BAROmode.
 • PresstoviewnextdatapointinDATAmode.
 • Pressoncetoincreasesettingvalue.
 • PresstorecallthecompassinCOMPASSmode.
4. STOP / - Button ( VIEW / - )
NOTE: STOP / - is labeled as VIEW / - on AXIO max.
 • PresstoswitchdisplayviewinTIMEandALTI-BAROmodes.
 • Pressandholdfor3secondstosaveruninCHRONmode.
 • PresstoselectrundatainDATAmode.
 • Pressoncetodecreasesettingvalue.
 • PresstorecallthecompassinCOMPASSmode.