HighGear AXIO Series - Settings Alarm

ENGLISH
25
Setting Alarms
NOTE: START / + is labeled as RECALL / + on AXIO max.
NOTE: STOP / - is labeled as VIEW / - on AXIO max.
Setting the Hydration Alarm
1. Use the STOP / - key to select the hydration alarm.
2. Press and hold ADJUST for 3 seconds to begin adjusting the hour setting.
3. Press START / + or STOP / - to increase or decrease the hour.
4. Press MODE to move to minutes setting.
5. Press START / + or STOP / - to increase or decrease the minutes.
6. Press ADJUST to exit setting. The hydration alarm will automatically turn ON
and begin to count-down upon exit.
Setting the Altitude Alarms
1. Use the STOP / - key to select either altitude alarm 1 or 2.
2. Press and hold ADJUST for 3 seconds to begin adjusting the altitude setting.
3. Press START / + or STOP / - to increase or decrease the desired altitude.
4. Press ADJUST to exit setting. The altitude alarm will automatically turn ON upon exit.
Turning Alarms ON or OFF
1. Use the STOP / - key to select desired alarm.
2. Press START / + to toggle the alarm between ON and OFF.
The alarm icon will appear in TIME, ALTI-BARO, CHRON, DATA and ALARM
modes when any alarm is turned ON.