Need help?Do you have a question about the HighGear Axis and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Altimeter | Yes |
| Barometer | Yes |
| Thermometer | Yes |
| Backlight | Yes |
| Alarm | Yes |
| Stopwatch | Yes |
| Countdown Timer | Yes |
| Calendar | Yes |
Instructions for replacing the watch battery and general care tips.
Symbols for weather conditions and time/alarm indicators.
Symbols for altitude and pressure/temperature units.
Distinguishes between Quick Press and Press & Hold key actions.
Key actions for entering and adjusting settings.
Overview of the primary display modes of the watch.
Details on navigating programming and backlight activation.
How to view and switch between Time Zone 1 and Time Zone 2.
Procedure for adjusting hours, minutes, and date.
Displays showing day/date, barometric pressure graphs, and temperature.
Details of the compass display, calibration, and declination setting.
How to re-enable the compass after it times out.
Steps to set up the barometer and view secondary display options.
Explanation of the 24-hour barometric pressure change graph.
How to switch between Fahrenheit and Celsius for temperature.
Procedure to set the current altitude and calibration.
Changing altitude units and managing altitude data points.
Procedure for clearing stored altimeter data.
Explanation of Laps and Splits and basic operation.
How to time laps/splits, save, or delete workout data.
How to view stored runs, laps, and split times.
Detailed steps for clearing individual or all chronograph data.
Procedure for programming hours, minutes, and chime for alarms.
Procedure for programming hours, minutes, and chime for alarms.
How to perform a factory reset to default settings.
Symptoms and solutions for battery and display problems.
Troubleshooting compass issues caused by magnetic fields.
To Next Page
