Section 6 - Storing the Mower
Page 6-3
13. Secure the hydraulic hoses to the
hose holder on the hitch to keep them
off the ground and clean.
14. Place the PTO driveline in the support
bracket.
15. For single point connection, wrap the
safety chain through the drawbar
connector and fasten to keep the
connector off the ground.
16. Change the oil in all the gear boxes.
See the Maintenance Section for
procedures.
- Fill the driveboxes to the oil levels as
outlined in the Maintenance Section.
Hydraulic Hoses, PTO and Connector
108025
To Next Page
Loading...