HighPoint SSD7105 - Appendix

HighPoint NVMe Boot RAID Windows Installation Guide
18
Appendix
Support command: help/info/quit/exit/create/delete.
 Create Command
Syntax
Create Array Type (RAID0/RAID1) Member Disk list (1/1, 1/2|*) Capacity
(100|*)
Examples
<<< create RAID0
<<< create RAID0 *
<<< create RAID0 * *
Create RAID0 array with all disks and with maximum capacity.
<<< create RAID1 1/1, 1/3 10
Create RAID1 array with disk 1/1 and 1/3 and with 10GB capacity.
<<< create RAID10 * 10
Create RAID1 array with all disks and with 10GB capacity.
 Delete Command
Syntax
delete {array ID}
Examples
<<< delete 1
Delete the first array from Logical device list.
<<< delete 2
Delete the second array from Logical device list.
 Info Command
Syntax