Name: Hikmicro THUNDER Series
Brand: Hikmicro
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Thermal Image Scope User Manual

3.7 Correct Defective Pixel

The device can correct the defective pixels on the screen which are not performed as expected.

Steps

1. Hold to show the menu.

2. Select .

3. Press , , , and to move the cursor to the position of dead pixel.

4. Press to correct the dead pixel.

Note

The selected defective pixel can be magnified and displayed at the bottom right of the interface.

Figure 3-3 Correct Defective Pixel

3.8 Flat Field Correction

The image calibration function can correct non-uniformity of display.

Steps

1. Hold to go to the menu.

2. Select and press to switch FFC mode.

– Manual: Hold in live view to trigger image calibration.

– Auto: The device performs FFC automatically according to the set schedule when switching

on the camera.

– External: Cover the lens cover, then hold in live view to trigger calibration.

3. Hold to save the settings and exit.

3.9 Set Picture in Picture Mode

Steps

1. In the view mode, hold to show the menu.

Questions and Answers:

Need help?

Do you have a question about the Hikmicro THUNDER Series and is the answer not in the manual?

Hikmicro THUNDER Series Specifications

General