EasyManuals Logo

Hikmicro THUNDER Series User Manual

Hikmicro THUNDER Series
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Thermal Image Scope User Manual
27
Chapter 8 Frequently Asked Questions
8.1 Why is the monitor off?
Check whether the device is off-battery. Check the monitor after charging the device for 5
minutes.
8.2 The image is not clear, how to adjust it?
Adjust the diopter adjustment knob until the image is clear. Refer to section Adjust Diopter.
8.3 Capturing or recording fails. What's the problem?
Check the following items.
Whether the device is connected to your PC. Capturing or recording is disabled in this status.
Whether the storage space is full.
Whether the device is low-battery.
8.4 Why the PC cannot identify the device?
Check the following items.
Whether the device is connected to your PC with supplied USB cable.
If you use other USB cables, make sure the cable length is no longer than 1 m.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hikmicro THUNDER Series and is the answer not in the manual?

Hikmicro THUNDER Series Specifications

General IconGeneral
Frame Rate50 Hz
ApertureF1.0
HotspotYes
Distance MeasurementYes
Video RecordingYes
Image CaptureYes
Wi-FiYes
Standby ModeYes
Protection LevelIP67
Resolution384x288, 640x512
DisplayOLED
Lens Options19mm, 25mm, 35mm, 50mm
Response Waveband8-14μm
ReticleYes
Battery TypeRechargeable Li-ion
Power SupplyDC 5V
Operating Temperature-20°C to +50°C

Related product manuals