Name: Hikmicro THUNDER Series
Brand: Hikmicro
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Thermal Image Scope User Manual

Chapter 5 Measure Distance

The device can detect the distance between the target and the observation position.

Before You Start

When measuring the distance, keep the hand and the position steady. Otherwise, the accuracy

may be affected.

Steps

1. Hold to show the menu.

2. Select and press to go to the setting interface.

1) Press or to select the target from Deer, Grey Wolf, Brown Bear, and Custom.

2) Set the target height.

Note

The available height ranges from 0.1 m to 9.9 m.

3) Press to confirm.

3. Align the center of top mark with the edge of target top. Press .

The cursor blinks on the top edge of the target.

4. Align the center of bottom mark with the edge of target bottom. Press .

Result

The left top of the image displays the distance measurement result and the height of the target.

Figure 5-1 Measurement Result

Note

Go to distance measurement interface, and press to view the result of the previous

measuring target.

Questions and Answers:

Need help?

Do you have a question about the Hikmicro THUNDER Series and is the answer not in the manual?

Hikmicro THUNDER Series Specifications

General