Hikmicro THUNDER Series - Adjust Digital Zoom

Thermal Image Scope User Manual
16
2. Select and enter PIP mode. The details show in the upper center.
● When reticle is enabled, the PIP view is the detail of reticle.
● When reticle is not enabled, the PIP view is the detail of central part.
Figure 3-4 Set Picture in Picture Mode
3. Hold to exit.
Note
● If digital zoom is enabled, the PIP view also zooms. If the digital zoom ratio exceeds 4, the PIP
does not zoom.
● This function varies according to different camera models.
3.10 Adjust Digital Zoom
You can zoom the image by using this function.
Press in the view mode, the live view switches between 1×, 2×, 4×, and 8×.
Note
This function varies according to different camera models.