Hikmicro THUNDER Series User Manual

Thermal Image Scope User Manual
2
Figure 1-1 Components of Thermal Telescope
Table 1-1 Component Description
No.
Component
Function
1
Lens Cover
Protects the lens.
2
Focus Ring
Adjusts focus to obtain clear targets.
3
Type-C Interface
To connect the device to power supply or transmit data
with a type-C cable.
4
Fixing Ring
Holds the eyepiece in place.
5
Battery
Compartment
For holding the battery.
6
Bolt
Loosens the bolt to install the batteries.
7
Diopter
Adjustment Ring
Adjusts the dioptric setting.
8
Eyepiece
The piece placed closest to the eye to view the target.
9
Knob
Secure the device to the rail.
Note
The rail is not included in the package. Please purchase it separately.

Hikmicro THUNDER Series Specifications

General

Frame Rate	50 Hz
Aperture	F1.0
Hotspot	Yes
Distance Measurement	Yes
Video Recording	Yes
Image Capture	Yes
Wi-Fi	Yes
Standby Mode	Yes
Protection Level	IP67
Resolution	384x288, 640x512
Display	OLED
Lens Options	19mm, 25mm, 35mm, 50mm
Response Waveband	8-14μm
Reticle	Yes
Battery Type	Rechargeable Li-ion
Power Supply	DC 5V
Operating Temperature	-20°C to +50°C