HIKVISION 1200KI User Manual

4 How to use 485 control back-end GUI4.0
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Press OK button or button on joystick to make the selection
Pls note that mouse connected on backend will have influence on keyboard control (e.g.
if you move the mouse by accident, you have to click ESC button to quit again)
Also if you quit current menu by accident, you need to enter other menu first, and then
ESC and enter previous menu again (this is a little complicated, because of definition in
GUI4.0 layer, under optimization development now)
8. Once you entered Liveview Mode,
1) You can press NUM button to select the camera you want to see (if you want to view
camera 11, just press number 1 twice quickly)
2) Or push joystick left/right to change camera to last/next one
3) You can press FOCUS-/MULT button to create window division one by one, 2,4,6, etc…,
and use joystick to switch between pages

HIKVISION 1200KI Specifications

General

Video Compression	H.265+/H.265/H.264+/H.264
Working Humidity	10% to 90%
Category	NVR
Channels	16
Network Interface	1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
USB Interface	USB 2.0
HDMI Output	1 HDMI output
VGA Output	1 VGA output
Audio Output	1 RCA audio output
Two-Way Audio	Yes
Decoding Format	H.265/H.264
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Type	16 PoE 4K NVR