G4 Mobile Recorder• Installation Guide and Platform Settings
13
Adjust the DBA camera angle.
1) Loosen the screws on the base and then loosen the two screws on the upper side of the
base with hex screwdriver.
2) Rotate the camera to adjust the surveillance angle. Adjustment range: pan: 0° to 5°, tilt:
0° to 50°, rotate: 0° to 360°.
3) Fix the base with screws.
DBA camera angle adjustment requires the dedicated hex tool or hex screwdriver.
Dedicated Tool Illustration
4) Run the app and check the live view image. Make sure the head and shoulder of the
driver are in the red frame.
To Next Page
Loading...
