Need help?Do you have a question about the HIKVISION AE-DI5042-G4 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| GPS (satellite) | Yes |
| Number of cameras | 1 |
| Main camera sensor | CMOS |
| Maximum frame rate | 25 fps |
| Supported video modes | 1080p |
| Main camera resolution | 1920 x 1080 pixels |
| Main camera sensor size | 1/2.5 \ |
| Wi-Fi frequency | 2.4 GHz |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Built-in display | No |
| Image formats supported | JPEG |
| Package depth | 153 mm |
| Package width | 223 mm |
| Package height | 63 mm |
| Package weight | 600 g |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
Weight and Dimensions| Depth | 82 mm |
|---|---|
| Width | 124 mm |
| Height | 33 mm |
| Weight | 300 g |
Covers technician requirements, site, and vehicle electrical information.
Lists necessary tools for device installation.
Details required devices and their specifications for setup.
Explains how to obtain and prepare device software before installation.
Outlines installation considerations like anti-vibration and heat dissipation.
Guides on connecting the main bundle and device cables correctly.
Guides installing the main unit and adjusting its camera view.
Details installing the Driver Behavior Analysis camera and adjusting its view.
Covers installing and adjusting the front row camera.
Guides installing and adjusting the rear row camera.
Details installing and adjusting the backup camera.
Lists important warnings and precautions for installation.
Configures Advanced Driver Assistance Systems features.
Configures Driver Behavior Analysis alarms and sensitivity.
Sets fundamental device parameters like license plate and sensor.
Configures Wi-Fi and Cellular data settings for connectivity.
Adjusts video resolution, bit rate, and encoding for cameras.
Manages audio recording, card status, and formatting.
Allows rebooting, restoring defaults, and viewing device info.
Guides on enabling Ehome platform connectivity.
Steps to add the G4 device to the 5200 platform.
How to modify device details within the 5200 platform.
Procedure for removing a G4 device from the platform.
Accessing live video streams of the G4 device on the platform.
Viewing recorded video playback through the platform.
Locating the G4 device using GPS on the platform.
Performing pattern playback for recorded data on the platform.
Configuring alarm rules for the G4 device on the platform.
Monitoring real-time alarms within the platform's alarm center.
Searching for historical alarm records on the client software.
Performing remote firmware upgrades for the G4 device.
Configuring device settings remotely via the platform.
Enabling and using two-way audio functionality for the G4 device.
Configuring Text-to-Speech features for the G4 device.
Troubleshooting steps for mobile hotspot connection issues.
Instructions for upgrading the device firmware using a TF card.
Steps to restore the device to its factory firmware.
Guides on upgrading multiple devices simultaneously via TF card.
To Next Page
