HIKVISION AX DS-PWA32-HG - Page 22

Note
The condions of no SIM card, no baery, AC power o, or network disconnected, will cause
Control Panel Fault.
Figure 3-4 Power On
5. Connect the Ethernet cable to an internet outlet. While the device is added to a Hik-Connect
account, the Link indicator turns green.
Figure 3-5 Connect to the Ethernet
6. Secure the rear cover to the installaon posion with the supplied screws. Aach the control
panel on the rear cover, and
ghten the rear cover screw to complete the installaon.
AX Security Control Panel
13