HIKVISION AX DS-PWA32-HG User Manual

Fault Check
The system determines whether to check the faults listed on the page. The system will only check
the fault that is selected.
Click System → System
Opons → Control Panel Fault Checklist to enter the page.
Detect Network Camera Disconnecon
If the opon is enabled, when the linked network camera is disconnected, an alarm will be
triggered.
Baery Supervision
If the opon is enabled, when baery is disconnected or out of charge, the device will upload
events.
Wired Network Fault Check
If the opon is enabled, when the wired network is disconnected or with other faults, the alarm
will be triggered.
Wi-Fi Fault Check
If the
opon is enabled, when the Wi-Fi is disconnected or with other faults, the alarm will be
triggered.
Cellular Network Fault Check
If the opon is enabled, when the cellular data network is disconnected or with other faults, the
alarm will be triggered.
SIM Card Fault Check
If the
opon is enabled, the alarm will be triggered for faults of the SIM card.
AC Power Down Check Time
The system checks the fault aer the congured me duraon aer AC power down.
To compliant the EN 50131-3, the check me duraon should be 10 s.
Time
Sengs
You can set the device me zone, synchronize device me, and set the DST me. The device
supports me synchronizaon via Hik-Connect server.
Time Management
Click System → Date and Time to enter the Time Management page.
AX Security Control Panel
54

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English