HIKVISION AX DS-PWA32-HG User Manual

If the user connuously input the incorrect password for more than the congured mes, the
account will be locked.
Note
The administrator has two more aempts than the congured value.
Locked
Duraon
Set the locking duraon when the account is locked.
Note
The available locking duraon is 5s to 1800s.
3. Click to unlock the account or click Unlock All to unlock all locked users in the list.
4. Click Save.
Module Lock
Sengs
Set the module locking parameters, including the Max Failure Aempts, and locked duraon. The
module will be locked for the programmed
me duraon, once the module authencaon has
failed for the amount of congured mes.
Steps
1. Click System → Security → Module Lock Sengs to enter the Module Lock Sengs page.
2. Select a module from the list, and click the
icon.
3. Set the following parameters of the selected module.
Max. Failure Aempts
If a user connuously tries to authencaon a password for more than the congured
aempts
permied, the keypad will be locked for the programmed duraon.
Locked Duraon
Set the locking duraon when the keypad is locked. Aer the congured duraon, the
keypad will be unlocked.
4. Click OK.
5.
Oponal: Click the Lock icon to unlock the locked module.
Figure 4-31 Module Lock
Sengs
AX Security Control Panel
56

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English