HIKVISION AX DS-PWA32-HG User Manual

System Maintenance
You can reboot the device, restore default sengs, import/export conguraon le, or upgrade
the device remotely.
Select the device and click Remote
Conguraon in the client soware, or enter the device IP
address in the address bar of the web browser. Click System → System Maintenance to enter the
Upgrade and Maintenance page.
Reboot
Click Reboot to reboot the device.
Restore Default Sengs
Click Partly Restore to restore all parameters except for admin user informaon, wired network,
Wi-Fi network, detector
informaon, and peripheral informaon to default ones.
Click Restore All to restore all parameters to the factory sengs.
Import Conguraon File
Click View to select conguraon le from the PC and click Import Conguraon File to import
conguraon parameters to the device.
Export Parameters
Click Export
Conguraon File to export the device conguraon parameters to the PC.
Upgrade File
Click View to select an upgrade le from the PC and click Upgrade to upgrade the device
remotely.
Note
• Do not power
o when the device is upgrading.
• Only manufacturer can use this funcon.
Cercate Standard
Click System → System Maintenance → Cercate Standard to enter the cercate standard
sengs page.
You can switch between EN Defaulted and General Standard mode.
The device applies EN Standard by default.
Note
When you select EN Defaulted, the user permission and arming parameters will conform to the EN
Standard.
AX Security Control Panel
57

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English