HIKVISION Door Station - Remote Operation; Activate Device

1 Remote Operaon
The Video Intercom module provides remote control and conguraon on video
intercom products via the iVMS-4200 client soware.
1.1 Acvate Device
You can only congure and operate the door staon aer creang a password for
the device
acvaon.
Default parameters of door staon are as follows:
•
Default IP Address: 192.0.0.65.
•
Default Port No.: 8000.
•
Default User Name: admin.
Steps
1.
Run the client
soware, enter Device Management, check the Online Device
area.
2.
Select an
inacvated device and click the Acvate.
Figure 1-1 Online Device Area
3.
Create a password, and conrm the password.
Figure 1-2 Acvate Device
Door Staon Quick Start Guide
1