HIKVISION Door Station - Add Device

Figure 1-4 Modify Parameters
Note
•
The default port No. is 8000.
•
The default IP address of the door staon is 192.0.0.65.
•
Aer eding the network parameters of device, you should add the devices
to the device list again.
1.3 Add Device
To congure the device remotely, you need to add the device to iVMS-4200 client
soware.
Steps
1.
Select the acvated device and click Add to Client.
Figure 1-5 Add Device
2.
Enter corresponding informaon, and click Add.
Door
Staon Quick Start Guide
3