HIKVISION Door Station - Dial via Nametag Module

Figure 1-8 Dial Sengs Page (Private SIP)
Figure 1-9 Dial Sengs Page (Standard SIP)
3.
Enter the Room No. of the indoor
staon which the main unit connected to. You
can call corresponding resident by press the call buon on the main unit.
1.4.2 Dial via Nametag Module
Steps
1.
Select device, click Remote Conguraon.
Figure 1-10 Remote Conguraon
2.
Click Intercom → Sub Module to enter the sub module
conguraon page.
Door
Staon Quick Start Guide
5