HIKVISION DS-1600KI - Date and Time Settings

To Next Page

To Previous Page

• Click

or to preview the previous or next camera or group.

• Enter 0 in the numeric panel and click to stop the live view.

Oponal: You can click to perform operaons including full screen, capture picture, record

video, two-way audio, and view parameters of the camera on live view.

Note

If you perform operaons of capture picture and record video, make sure to connect the

keyboard with a USB ash drive, or provide a valid and correct network connecon between PC

(running FTP server) and the keyboard, and set the FTP parameters of keyboard correctly. Refer

to Set Storage for FTP

conguraon.

Figure 4-10 Live View

4.2.2 PTZ Control

You can click in the live view mode to achieve PTZ control operaon. The PTZ control should be

supported by the added device.

Set and Call a Preset

A preset is a

predened image posion which contains informaon of pan, lt, zoom, focus and

other parameters.

Steps

1. Click Preset in the PTZ control panel.

2. Use the

joysck to move the camera to the desired scene.

3. Click

to set the preset.

DS-1600KI Keyboard Quick Start Guide

Other manuals for HIKVISION DS-1600KI