Task 12: Configure the image quality.
Min. Zoom Limit
Set the value of MIN. ZOOM LIMIT to ON to limit the minimum zoom of the lens.
The Min. Zoom Limit function is supported by certain speed dome model series.
Chroma Suppress
Set the Chroma suppress to ON can suppress the color noise so as to get the clear and high-quality
image in the low luminance environment.
The Chroma Suppress function is supported by certain speed dome model series.
Saturation
Saturation indicates the brightness of the color. The higher the saturation, the brighter the color is.
The saturation function is supported by certain speed model series.
Scene Mode
Select the scene mode as INDOOR or OUTDOOR, and the default image settings will be changed
according to the selected scene mode.
Contrast
Contrast is the degree of difference between the darker and lighter parts of the image.
The contrast function is supported by certain camera model series.
HLC
Set the value of HLC to brighten the darker area and weaken the highlight area of the image. The
greater the value is, the stronger the effect will be.
The HLC function is supported by certain camera model series.
Sharpness Compensation
Set the value of SHARPNESS COMP to automatically adjust the sharpness of the image to get a clear
image. The greater the value is, the stronger the effect will be.
Task 13: Configure the defog parameters.
When there is fog in the image, you can enable this function to get clear image.
3.3.4 Configuring Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video from being live viewed and
recorded. The masked areas can move with the panning/tilting movements and automatically adjust
To Next Page
Loading...
Need help?
General
Weight and Dimensions
