HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA 19
Figure 8, Camera Settings
Configuring the Focus Settings
Setting the Focus Mode
1. Move the cursor to FOCUS using the direction buttons and click IRIS+ to enter.
2. Click up/down direction buttons to set the focus mode to AF, MF, or HAF.
• AF (Auto-Focus): The lens remains in focus during PTZ movements.
• MF (Manual Focus): You need to adjust the focus with Focus+ and Focus- buttons manually.
• HAF (Half-Auto Focus): The speed dome focuses automatically only once after panning, tilting,
and zooming.
3. Click the IRIS+ button to save the settings.
Setting the Focus Limit
Purpose:
This function limits the minimum focus distance. You can configure the focus limit longer when the target
is at a distance, to avoid the speed dome focusing on the objects close to it; or configure the focus limit
shorter when the target is near the speed dome, and avoid it focusing on the father objects.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
