EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2AE7232TI-A

HIKVISION DS-2AE7232TI-A User Manual

HIKVISION DS-2AE7232TI-A
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA 4
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into “Warnings” and “Cautions”:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings
Follow these safeguards to prevent
serious injury or death.
Cautions
Follow these precautions to prevent
potential injury or material damage.
Warnings:
Adopt a power adapter that can meet the safety extra low voltage (SELV) standard. Refer to the
specification manual for the standard of power adapter and the power consumption cannot be less
than the required value.
Do not connect several devices to one power adapter as an adapter overload may cause over-heating
and can be a fire hazard.
If the product is installed on a wall or ceiling, the device should be firmly fixed.
To reduce the risk of fire or electrical shock, do not expose an indoor product to rain or moisture.
This installation should be made by a qualified service person and should conform to all local codes.
Install blackout equipment into the power supply circuit to address supply interruption.
If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the product yourself. (We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
Cautions:
Make sure the power supply voltage is correct before using the product.
Do not drop the product or subject it to physical shock. Do not install the product on vibratory surface
or places.

Other manuals for HIKVISION DS-2AE7232TI-A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2AE7232TI-A and is the answer not in the manual?

HIKVISION DS-2AE7232TI-A Specifications

General IconGeneral
Sensor typeCMOS
Progressive scanYes
Optical sensor size1/2.8 \
Total megapixels2 MP
Gain control typeAuto/Manual
Maximum resolution1920 x 1080 pixels
Supported video modes1080p
Analog signal format systemNTSC, PAL
Form factorDome
Mounting typeCeiling/wall
Product colorWhite
International Protection (IP) codeIP66
TypeCCTV security camera
PTZ modes5 Pattern
PTZ protocolsPelco-P/D
Languages supportEnglish
Number of languages1
Placement supportedIndoor & outdoor
Connectivity technologyWired
Digital zoom16 x
Optical zoom32 x
Focal length range4.8 - 153 mm
Maximum aperture number4.6
Minimum aperture number1.6
Built-in HDDNo
LED typeIR
Night vision distance150 m
AC input voltage24 V
Power source typeAC
Power consumption (max)40 W
Pan range0 - 360 °
Pan speed160 °/sec
Tilt angle range-15 - 90 °
Camera shutter speed1/10000 - 1 s
Minimum illumination0 lx
InterfaceBNC
Operating temperature (T-T)-30 - 65 °C
Weight and Dimensions IconWeight and Dimensions
Height353.4 mm
Weight4500 g
Diameter220 mm

Related product manuals