Name: HIKVISION DS-2AE7232TI-A
Brand: HIKVISION
Rating: 4 (1 reviews)

To Next Page

To Previous Page

HD-TVI Speed Dome DS-2AE7232TI-A User Manual

UM THD DS-2AE7232T-x 020519NA 23

Configuring the Noise Reduction

To reduce the image noise, you can set the value of 2D DNR and 3D DNR respectively. The greater the

value, the less noise will be in a low illumination environment. You can disable the function by turning the

value to OFF.

Configuring the Image Quality

• Wide Limit: Set the value of WIDE LIMIT to limit the minimum zoom of the lens with 1.0, 1.1, 1.2, 1.3, 1.5,

1.8, and 2.0 available.

NOTE: The Wide Limit function is supported by certain speed dome models.

• Chroma Suppress: Set the Chroma suppress value from 1 to 3 to suppress the color noise so as to get a

clear and high-quality image in a low luminance environment.

NOTE: The Chroma Suppress function is supported by certain speed dome models.

• Saturation: Saturation value from 0 to 7 indicates the brightness of the color. The higher the saturation,

the brighter the color.

NOTE: The saturation function is supported by certain speed dome models.

• Scene Mode: Set the scene mode to INDOOR or OUTDOOR, and the default image settings will be changed

according to the selected scene mode.

• Contrast: Contrast is the degree of difference between the darker and lighter parts of the image.

NOTE: The contrast function is supported by certain camera models.

• HLC: Set the value of HLC to brighten the darker area and weaken the highlight area of the image. The

greater the value, the stronger the effect will be.

NOTE: The HLC function is supported by certain camera models.

• Sharpness Compensation: Set the SHARPNESS COMP value from 0 to 15 to automatically adjust the

image sharpness to get a clear image. The greater the value, the stronger the effect.

• Defog Parameters: When there is fog in the image, you can enable the Defog function to get a clear

image.

• Lens Initialization: You can turn INIT LENS on to trigger a spontaneous lens initiation to ensure normal

operation.

Configuring Privacy Mask

Purpose:

Focus Limit enables you to cover certain areas on the live video from being live viewed and recorded. The

masked areas can move with the panning/tilting movements and automatically adjust the size as the lens

zooms in/out.

Other manuals for HIKVISION DS-2AE7232TI-A

Questions and Answers:

Need help?

Do you have a question about the HIKVISION DS-2AE7232TI-A and is the answer not in the manual?

General

Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
Total megapixels	2 MP
Gain control type	Auto/Manual
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Analog signal format system	NTSC, PAL
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Type	CCTV security camera
PTZ modes	5 Pattern
PTZ protocols	Pelco-P/D
Languages support	English
Number of languages	1
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Digital zoom	16 x
Optical zoom	32 x
Focal length range	4.8 - 153 mm
Maximum aperture number	4.6
Minimum aperture number	1.6
Built-in HDD	No
LED type	IR
Night vision distance	150 m
AC input voltage	24 V
Power source type	AC
Power consumption (max)	40 W
Pan range	0 - 360 °
Pan speed	160 °/sec
Tilt angle range	-15 - 90 °
Camera shutter speed	1/10000 - 1 s
Minimum illumination	0 lx
Interface	BNC
Operating temperature (T-T)	-30 - 65 °C