HIKVISION DS-2CD2T26G2-4I User Manual

Network Camera User Manual
149
Picture
Click Picture to enter the picture searching interface. You can search, view, and
download the pictures stored in the local storage or network storage.
Notes:
 Make sure HDD, NAS or memory card are properly configured before you process
the picture search.
 Make sure the capture schedule is configured. Go to Configuration > Storage >
Schedule Settings > Capture to set the capture schedule.
Picture Search Interface
Steps:
1. Select the file type from the dropdown list. Continuous, Motion, Alarm, Motion |
Alarm, Motion & Alarm, Line Crossing, Intrusion Detection, and Scene Change
Detection are selectable.
2. Select the start time and end time.
3. Click Search to search the matched pictures.
4. Check the checkbox of the pictures and then click Download to download the
selected pictures.
Note:
Up to 4000 pictures can be displayed at one time.

HIKVISION DS-2CD2T26G2-4I Specifications

General

Model	DS-2CD2T26G2-4I
IR Range	Up to 30m
Video Compression	H.265+/H.265/H.264+/H.264
Power Supply	12 VDC ± 25%, PoE (802.3af)
Ingress Protection	IP67
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Operating Conditions	Humidity 95% or less (non-condensing)
Type	Network Camera
Sensor Type	1/2.8" Progressive Scan CMOS
Max Resolution	1920 x 1080
Audio Compression	G.711/G.726
Network Interface	1 RJ45 10M/100M Ethernet port
Lens	2.8mm / 4mm / 6mm