Need help?Do you have a question about the HIKVISION DS-2CE1582P-VFIR3 and is the answer not in the manual?
General| Image Sensor | 1/3" Progressive Scan CMOS |
|---|---|
| Signal System | PAL/NTSC |
| Effective Pixels | 1920(H) x 1080(V) |
| Resolution | 1080P |
| Min. Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Lens Mount | M12 |
| Day & Night | ICR |
| Synchronization | Internal |
| Weather Proof | IP66 |
| IR Range | Up to 40m |
| Lens | 2.8mm - 12mm motorized lens |
| Video Frame Rate | 25fps@1080P |
| HD Video Output | 1 HD output |
| S/N Ratio | More than 52dB |
| Operating Conditions | -40°C to +60°C; Humidity 95% or less (non-condensing) |
| Power Supply | 12 VDC±10% |
Details FCC compliance and operational conditions for digital devices.
Confirms product compliance with relevant European directives and standards.
Step-by-step guide for securely mounting the camera on various wall types.
Instructions for connecting the correct power adapter to the camera.
Configures image exposure using ELC or DC modes, shutter, and brightness.
Adjusts white balance modes, R-Y, and B-Y gain for accurate color rendition.
Manages the camera's switch between color day mode and B/W night mode.
Configures motion detection sensitivity, areas, display, and alarm settings.
Allows setting up privacy masks to obscure specific areas of the video feed.
To Next Page