You can set the D-WDR LEVEL from 0 to 20. The bigger the
value is, the higher the D-WDR intensity is.
AGC (Auto Gain Control)
AGC is a control circuit that automatically changes the gain
of a receiver or other piece of equipment to maintain the
output video quality. Under low illuminations, AGC function
can regulate the gain and amplify of the video signal.
Four options are available for AGC: HIGH, MID, LOW, OFF.
3D DNR (Digital Noise Reduction)
DNR is the process of removing noise from a signal. It
compensates for the low-light conditions, and corrects
imperfections in the image by removing a large percentage
of the noises; it helps to deliver a clear signal, a more
visually appealing image, and makes it easier to identify the
objects.
Five options are available for 3D DNR: AUTO, HIGH, MID,
LOW, OFF.
SENSE-UP
This series of camera supports frame accumulation at
maximum of 512, it will make the image brighter by
multiple exposures the image and it only works in low
luminance.
You can set the value for sense-up to AUTO, OFF, x2, x4, x8,
x16, x32, x64, x128, x256 and x512.
To Next Page
Loading...
Need help?
General
