HIKVISION DS-2CE16H0T-ITPF User Manual

 Keep the camera away from liquid while in use for
non-water-proof device.
 While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
 High performance CMOS sensor
 IR cut filter with auto switch
 OSD menu with configurable parameters
 Auto white balance
 internal synchronization
 SMART IR mode
 3-axis adjustment
1.2 Overview
1.2.1 Overview of Type I Camera
DC12VIN
Photoresistor
Lens
Main Body
Bracket
Power Cord
12 VDC
Video Cable
Switch Button
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
Lens
Main Body
Bracket
Switch Button
Power Cord
12 VDC
Video Cable
Photoresistor
Figure 1-2 Overview of Type II Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.

HIKVISION DS-2CE16H0T-ITPF Specifications

General

Brand	HIKVISION
Model	DS-2CE16H0T-ITPF
Category	Security Camera
Language	English