Network Speed Dome User Manual
(2) Click to set the system time from the pop-up calendar.
(3) Click to save the settings.
You can also check the Sync. with computer time checkbox to synchronize
the time of the speed dome with the time of your computer.
Figure 6-41 Time Sync Manually
Select the Time Zone
Purpose:
When the speed dome is taken to another time zone, you can use the Time Zone
function to adjust the time. The time will be adjusted according to the original
time and the time difference between the two time zones.
From the Time Zone drop-down menu as shown in Figure 6-42, select the Time
Zone in which the speed dome locates.
Figure 6-42 Time Zone Settings
Configuring RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of
the PTZ parameters should be done before you control the PTZ unit.
Steps:
1. Enter RS-485 Port Setting interface:
Configuration > System > System Settings > RS485
To Next Page
Loading...
Need help?
General
