Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Device Parameters and input the encryption password twice to encrypt the config file.
Figure 7-64 Encryption Configuration File
3. Select the path to export the current configuration file. You can configure the other cameras
with the file.
4. Click Diagnose Information to view the device error information.
Importing/Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Browse to select the local configuration file and then click Import to start importing
configuration file.
You need to reboot the positioning system after importing configuration file.
Figure 7-65 Import Configuration File
3. If the configuration file is encrypted, enter the password.
Figure 7-66 File Decryption
Upgrading the System
To Next Page
Loading...
Need help?
General
