HIKVISION DS-6904UDI - Chapter 10 Decoder Configuration and Operation by Client Software; 10.1 Interface Description

DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manua l
51
Decoder Configuration and
Operation by Client Software
Run the disk of iVMS-4200 Video Wall Client Software, and double click the icon to install it in your
PC. In this chapter, the basic procedure of operating the decoder by the software is described.
Interface Description
The following figure shows the main interface after accessing to the software.
Main Interface
Refer to the following table for the description of the decoding toolbar on the bottom of the main
interface.
Decoding Toolbar
Icon
Name
Description
/
Start/Stop Live View
Start/Stop live view of all the windows.
/
Start/Stop All Decoding
Start/Stop decoding all signal sources and
cameras.
Close All Windows
Close all the windows displayed on the
video wall.
Start All VCA Decoding
Start VCA decoding for all live view
signals. Once started, the VCA