HIKVISION DS-6904UDI - Chapter 11 Appendix; 11.1 FAQ; 11.2 List of Third-Party IP Cameras Access

DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manua l
84
Remote Configuration
Purpose
On the Remote Configuration interface, you can configure the parameters of the added device,
including the system, network, event, etc..
On the Device Management interface, click to select an added device from the list and click
Remote Configuration to enter Remote Configuration interface.
Remote Configuration
Configure the System parameters, Network parameters and Event parameters on the
Remote Configuration interface.
Configuring Ethernet Channel
Purpose
The Ethernet Channel is port link aggregation technology or port-channel architecture used
for the connection between the switches.
Click Remote Configuration > Network > Ethernet Channel to enter the Ethernet Channel
Settings interface.
Select a link number from the list.
Check the checkbox to select the network interfaces to form a channel-group link, which can
effectively enhance the link transmission bandwidth.