User Manual of Network Video Recorder
39
2. Positioning the cursor to the Add IP Camera and click to select Manual in the pop-up menu to enter the IP
Camera Management interface.
Figure 2. 20 Adding IP Camera Interface
3. Select the IP camera from the list and click the button to add the camera (with the same admin
password of the NVR). Or you can click the One-touch Adding button to add all cameras (with the same
admin password) from the list.
Make sure the camera to add has already been actiavted by setting the admin password, and the admin
password of the camera is the same with the NVR.
Table 2. 1 Explanation of the icons
Show the security status of the camera
to be active/inactive or the password
strength (strong/medium/weak/risk)
4. To add other IP cameras:
1) Click the Custom Adding button to pop up the Add IP Camera (Custom) interface.
To Next Page
Loading...
Need help?
General
