User Manual of Network Video Recorder
41
Figure 2. 23 IP Camera Management Interface
Table 2. 2 Explanation of the icons
Edit basic parameters of the camera
Add the detected IP camera.
The camera is connected; you can
click the icon to get the live view of
the camera.
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Advanced settings of the camera.
Upgrade the connected IP camera.
Show the security status of the
camera to be active/inactive or the
password strength (strong/weak/risk)
3. (For the encoders with multiple channels only) check the checkbox of Channel No. in the pop-up window, as
shown in the following figure, and click OK to finish adding.
Figure 2. 24 Selecting Multiple Channels
To Next Page
Loading...
Need help?
General
