HIKVISION DS-7208HGHI-K1

Before You Start
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connecon is valid and correct.
Steps
1.
Go to
Conguraon → Camera → Camera .
2.
Click .
3.
Set camera parameters like IP address, camera password, etc.
4.
Click Apply.
Import/Export IP Camera Conguraon File
The informaon of added network camera can be generated into an excel le and exported to the
local device for backup, including the IP address, port, password of admin, etc. And the exported
le can be edited on your computer, like adding or deleng the content, and copy the seng to
other devices by imporng the excel le to it.
Before You Start
Connect a backup device, such as a USB ash drive, to your video recorder.
Steps
1.
Go to Conguraon → Camera → Camera .
2.
Click More.
3.
Click Export/Import to export/import
conguraon les to the connected backup device.
4.
Set the storage device and folder path.
5.
Click Export/Import.
What to do next
Aer the imporng process is completed, you must restart the video recorder.
Advanced
Sengs
Steps
1.
Go to Conguraon → Camera → Camera .
2.
Click More.
3.
Congure the parameters as your desire.
H.265 Auto Switch Conguraon
If you enable the opon, the device will automacally switch to H.265 stream for the network
camera (which supports H.265 video format) for the
inial access.
Upgrade
Upgrade the added network cameras.
Export/Import
Digital Video Recorder User Manual
53