Network Video Recorder User Manual
70
Chapter 5 Recording Settings
5.1 Configuring Parameters
Purpose:
By configuring the parameters you can define the parameters which affect the image quality, such
as the transmission stream type, the resolution and so on.
Before you start:
1) Make sure that the HDD has already been installed. If not, please install a HDD and
initialize it. (Menu > HDD > General)
Figure 5-1 HDD
Step 1 Enter the Record settings interface to configure the recording parameters:
Menu > Record > Parameters
Figure 5-2 Recording Parameters
Step 2 Parameters Setting for Recording
To Next Page
Loading...
