User Manual of DS-7600NI Series NVR
60
Figure 5. 7 Edit Schedule
III. To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Note: Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other.
Repeat the above edit schedule steps to schedule recording for other days in the week. If the schedule can also be
applied to other days, click Copy.
Figure 5. 8 Copy Schedule to Other Days
IV. Click OK to save setting and back to upper level menu.
V. Click Apply in the Record Schedule interface to save the settings.
Draw the schedule:
Click on the color icons, you can choose the schedule type as continuous or event.
Figure 5. 9 Draw the Schedule
Descriptions of the color icons are shown in the figure below.
To Next Page
Loading...
Need help?
General
