Network Video Recorder User Manual
212
Figure 15-12 Configure Reserved Email
15.6 Reset Password
When you forget the admin password, you can use GUID file or your reserved email to reset the
password.
15.6.1 Reset Password by GUID
Before You Start
The GUID file must be exported and saved in the USB flash drive after you have activated the
device or edited the admin user account. (Refer to 15.5.1 Export GUID File).
Step 1 On the user login interface, click Forgot Password.
Step 2 Select the password resetting type to Verify by GUID.
Step 3 Insert the USB flash drive that contains GUID file.
Step 4 Select the GUID file from the USB flash drive and click Import to import the file to the device.
Step 5 After the GUID file is successfully imported, enter the reset password interface to set the
new admin password.
Step 6 Click OK to set the new password. You can export the new GUID file to the USB flash drive
for future password resetting.
When the new password is set, the original GUID file will be invalid.
To Next Page
Loading...
Need help?
General
