Network Video Recorder User Manual
31
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Step 2 Enter the password in IP Camera Activation to activate the IP camera(s) connected to the
device.
Step 3 (Optional) Check Reserved E-mail for future password resetting.
Step 4 Click OK。
What to do next:
Continue to export the GUID file to the USB flash driver for the future password resetting.
When you have enabled Reserved E-mail, continue to set the reserved email for the future
password resetting.
2.1.3 Using the Unlock Pattern for Login
For the Admin user, you can configure the unlock pattern for device login.
Configuring the Unlock Pattern
Step 1 After the device is activated, you can enter the following interface to configure the device
unlock pattern.
Figure 2-3 Set Unlock Pattern
Step 2 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when
the pattern is done.
To Next Page
Loading...
