HIKVISION DS-7604NI-SE/P Quick Start Guide

www.hikvision.com/en/us
To set the NVR to MOTION RECORDING, go to:
1. “MENU”>”RECORDING CONFIGURATION”
2. Click on the “EVENT” under the calendar (yellow). After this the mouse cursor will change to a
WAND.
3. Select the calendar, and it will turn YELLOW (just like on a computer, click on the top-left
corner of the calendar and drag to the bottom-right corner).
4. Press APPLY.
5. Press COPY to copy the new schedule to the remaining cameras.
SETTING UP RECORDING

HIKVISION DS-7604NI-SE/P Specifications

General

Product color	Black
Channels quantity	4 channels
Playback resolutions supported	5MP, 3MP, 1080p, UXGA, 720p, VGA, 4CIF, DCIF, 2CIF, CIF, QCIF
Audio input	1
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	5
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
HDD capacity	1000 GB
HDD interface	Serial ATA
Maximum HDD capacity	4000 GB
Power consumption (typical)	15 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	2000 g
Dimensions (WxDxH)	445 x 290 x 45 mm