HIKVISION DS-7604NI-SE/P - Formatting the Hard Drive

www.hikvision.com/en/us
If the Hard Drive (HDD) is not formatted (initialized), the NVR will begin to beep. The beeping will
continue until the HDD is formatted. To format the HDD, go to:
“MENU” > “SYSTEM CONFIGURATION” > “HDD”
Select the HDDs that need to be formatted, and press “INIT”
FORMATTING THE HARD DRIVE
3. FORMATTING THE HARD DRIVE
Please Note:
Units purchased with HDDs,
already come with formatted
HDDs
Formatting the HDDs also erases
the recorded video from the HDDs
(this does not affect the settings).
Free Space
Total HDD Space
List of HDDs