User Manual of Digital Video Recorder
107
Figure 8. 9 Set Arming Schedule of Alarm Input
5. Select Linkage Action tab to set alarm response actions of the alarm input (please refer to Chapter 8.6).
6. If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
Set PTZ linking parameters and click to save the settings. Click to complete the
settings of the alarm input.
Note: Please check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and
patterns are exclusive.
Figure 8. 10 Set PTZ Linking of Alarm Input
7. If you want to set alarm settings of another alarm input, repeat the above steps or just copy the above
settings to it by clicking in Alarm Input Settings interface.
To Next Page
Loading...
Need help?
General