User Manual of Digital Video Recorder
54
5.2 Configuring Record Schedule
Purpose:
Set the record schedule, and then the camera automatically starts/stops recording according to the configured
schedule.
Steps:
1. Enter the Record Schedule interface.
Menu>Record>Schedule
2. Configure Record Schedule
Figure 5. 8 Record Schedule
1) Choose the camera you want to configure.
2) Check checkbox to enable record schedule.
There are two ways to configure the record schedule.
Task 1: Edit the Schedule
Steps:
1) Click .
2) In the message box, you can choose the day which you want to set schedule.
3) To schedule an all-day recording, check checkbox to enable all-day recording.
4) Set the Type in the dropdown list, including Continuous, Motion, Alarm, Motion | Alarm and Motion
& Alarm.
Note: To enable Motion, Alarm, Motion | Alarm (motion or alarm) and Motion & Alarm (motion and
alarm) triggered recording, you must configure the motion detection settings or alarm input settings
as well. For detailed information, refer to Chapter 8.1 and Chapter 8.2.
To Next Page
Loading...
Need help?
General