User Manual of Digital Video Recorder
46
5. Click to save the key point to the patrol.
Repeat the above steps to add more key points.
You can also click to delete the corresponding key point and click to delete all the key points.
Figure 4. 8 KeyPoints Deletion
4.2.4 Calling Patrols
Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Calling patrol in the PTZ setting interface:
Steps:
1. In the PTZ setting interface.
Menu> Camera> PTZ> More Settings
2. Select the patrol number, and then click to call the patrol.
3. Click to stop it.
Figure 4. 9 Calling Patrol
Calling patrol in live view mode:
Steps:
1. In the live view mode, press PTZ control on the front panel or on the remote, or click PTZ Control icon
on the quick setting toolbar, to show the PTZ control panel.
2. Choose Camera in the list on the menu.
3. Choose Patrol on the control bar.
4. Double-click the patrol you want to call, or click to select the patrol and click to call the patrol.
To Next Page
Loading...
Need help?
General