User Manual of Digital Video Recorder
151
10.7 Detecting Bad Sector
Purpose:
You can detect the bad sector of the HDD to check the status of the HDD.
Steps:
1. Enter the Bad Sector Detection interface.
Menu>Maintenance>HDD Detect>Bad Sector Detection
Figure 10. 22 Bad Sector Detection
2. Select a HDD and choose Full Detection or Key Area Detection as the detection type.
3. Click to start detecting.
Figure 10. 23 Bad Sector Detecting
4. You can click to pause the detection and click to resume the detection.
5. If there is error information about the HDD, you can click to view the information.
To Next Page
Loading...
