User Manual of Digital Video Recorder
96
Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”.
Figure 7. 15 Export Finished
4. Check backup result.
Note: The Player player.exe will be exported automatically during record file export.
Figure 7. 16 Checkup of Event Export Result Using USB Flash Drive
7.1.4 Backing up Video Clips
Purpose:
You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB
HDDs, USB writer), or DVD-R/W.
Steps:
1. Enter Playback interface and play back the record file you want to set video clips.
Please refer to Chapter 6.1 Playing Back Record Files.
2. During playback, use buttons and in the playback toolbar to start or stop clipping record file(s).
3. Quit Playback interface after finishing clipping and you will then be prompted to save the clips.
Note: A maximum of 30 clips can be selected for each channel.
To Next Page
Loading...
Need help?
General