User Manual of Digital Video Recorder
56
Task 2: Draw the Schedule
Steps:
1) Click to select a record type, including Continuous, Motion, Alarm, M | A, M & A and None.
Note: To enable Motion, Alarm, M | A (motion or alarm) and M & A (motion and alarm) triggered
recording, you must configure the motion detection settings or alarm input settings as well. For
detailed information, refer to Chapter 8.1 and Chapter 8.2.
Figure 5. 12 Draw the Schedule (1)
2) Use the mouse to drag and draw time periods.
Note: Up to 8 periods can be configured for each day.
Figure 5. 13 Draw the Schedule (2)
You can repeat the above steps to set schedule for other channels. If the settings can also be used to other
channels, click , and then choose the channel to which you want to copy. Click in the Record
To Next Page
Loading...
Need help?
General