User Manual of Digital Video Recorder
69
Figure 5. 37 Unlocking Attention
Task 2: Protect file by setting HDD property to Read-only
Note: To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter 10.3
Managing HDD Group.
Steps:
1. Enter HDD setting interface.
Menu> HDD
Figure 5. 38 HDD General
2. Click to edit the HDD you want to protect.
Figure 5. 39 HDD General- Editing
3. Set the HDD to Read-only.
4. Click to save settings and back to the upper level menu.
Notes:
1) You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change the property to
R/W.
2) If there is only one HDD and is set to Read-only, the device can’t record any files. Only live view mode is
available.
3) If you set the HDD to Read-only when the device is saving files in it, then the file will be saved in next
R/W HDD. If there is only one HDD, the recording will be stopped.
To Next Page
Loading...
Need help?
General