HIKVISION DS-D2065LU-Y User Manual

2. You can switch the signal source using the following two ways.
-
Right-click and select Switch Signal Source to switch signal sources.
Figure 4-7 Switch Signal Sources by Right-click
-
Select one signal source in the drop-down list of Signal Source on the right of the client, and
click OK to switch signal sources.
Figure 4-8 Switch Signal Sources by Drop-down List
LCD Display User Manual
15

HIKVISION DS-D2065LU-Y Specifications

General

Brand	HIKVISION
Model	DS-D2065LU-Y
Category	Monitor
Language	English